Description
Our sheet piles have proven themselves in numerous construction projects and serve both structural and waterproofing functions. They are used with great success in excavation pits as well as in water and harbour engineering. They are also used in landfill construction, Flood protection systems, and remedial works for contaminated sites. Depending on the required level of watertightness, various sealing systems are available.
Advantages
- High reliability of adhesion to the steel surface thanks to the primer.
- Restoring forces within the sealing material seal the lock gap within the desired range.
- Water permeability of the locks can be significantly reduced.
Key data
The sealing element in the thread lock is designed as a compression seal and activates restorative forces in the sealing material during driving. The drive lock is preformed in a wedge shape to facilitate threading. Before the execution of work begins, the driving direction must be determined and adhered to. The bituminous material system can be applied at the factory or on-site and exhibits good adhesion to the steel surface.
Subsequent seals are performed as required, e.g., with wooden wedges, rubber, or plastic cords; to ensure complete watertightness, the lock joints must be welded together. This is only possible with dry, clean joints, and joints carrying water must be covered with welded flat or shaped steel as needed.
Subsequent seals are performed as required, e.g., with wooden wedges, rubber, or plastic cords; to ensure complete watertightness, the lock joints must be welded together. This is only possible with dry, clean joints, and joints carrying water must be covered with welded flat or shaped steel as needed.
Specification
- Product number
- D101